01Check splitting strip
The splitting strips are delicate parts of the product.
Make sure the splitting strip is not damaged before you apply tesa® EasySplice.
How to Easily Splice with tesa® EasySplice
Mercados
8 quick ways to maximize your tesa® EasySplice performance
Check out our best practice guideline and download the overview document for your reference below
02Don’t apply tape to the full width of the roll
When you apply tesa® EasySplice, leave a gap of about one thumb’s width to the edge of the roll, to avoid exposed adhesive running through the machine.
03Use a squeegee
Always use a squeegee when applying tesa® EasySplice to avoid premature opening and flying snippets.
04Trim the edges
To avoid damage to the web, trim the paper’s edges on both sides of tesa® EasySplice to avoid air pockets underneath the unsecured edges.
05Check length of flag of the expiring web
Make sure that the flag is approximately as long as the distance between the bumper/contact roller and the knife.
This will help to have the best bond between two webs.
06Use a wider tesa® EasySplice for high speeds
For higher machine speeds, we recommend using tesa® EasySplice in a wide width to make sure there is enough adhesive contact area for a reliable splice.
07Synchronize speeds
Make sure the speeds of the new and old reel are synchronized.
This is essential for a secure contact between the two reels.
08Don’t cover the contact adhesive
Don’t cover the open contact adhesive if you use reinforcement tape or liquid glue in addition to our tesa® EasySplice.
It might negatively influence the adhesive’s performance.
