Product Construction
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 110 µm |
Type of adhesive | type: acrylic |
Type of liner | type: coated paper |
Laser markable and self-adhesive
tesa® 6930 is a double layer, brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
Available in: black (glossy, matt), silver (glossy, matt), white (glossy)
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 110 µm |
Type of adhesive | type: acrylic |
Type of liner | type: coated paper |
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 110 µm |
Type of adhesive | type: acrylic |
Type of liner | type: coated paper |
Frost resistance | -40 °C |
Shelf life time | 12 months |
Suitable laser | , Nd:YAG, Yb:YAG |
Tamper evidence | yes |
Humidity resistance | very good |
Ageing resistance (UV) | very good |
Temperature resistance short term | 250 °C |
Temperature resistance long term | 120 °C |
Chemical resistance | very good |
Frost resistance | -40 °C |
Shelf life time | 12 months |
Suitable laser | , Nd:YAG, Yb:YAG |
Tamper evidence | yes |
Humidity resistance | very good |
Ageing resistance (UV) | very good |
Temperature resistance short term | 250 °C |
Temperature resistance long term | 120 °C |
Chemical resistance | very good |
Adhesion to Steel | 1.8 N/cm |
Adhesion to Steel | 1.8 N/cm |
Download the files below for more technical details and information on this product.