Product Construction
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
High-Speed markable and self-adhesive
tesa® 6940 is a double layer, brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
(black: up to 4000mm/ sec., yellow: up to 1000mm/sec).
Available in: black (glossy) and yellow
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Tamper evidence | yes |
Ageing resistance (UV) | very good |
Humidity resistance | very good |
Frost resistance | -40 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Peel off force from liner | 0,5-10 |
Chemical resistance | very good |
Temperature resistance long term | 120 °C |
Temperature resistance short term | 270 °C |
Tamper evidence | yes |
Ageing resistance (UV) | very good |
Humidity resistance | very good |
Frost resistance | -40 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Peel off force from liner | 0,5-10 |
Chemical resistance | very good |
Temperature resistance long term | 120 °C |
Temperature resistance short term | 270 °C |
Download the files below for more technical details and information on this product.