Product Construction
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 120 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Laser markable and self-adhesive
tesa® 6930 is a double layer, brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
Available in: black (glossy, matt), silver (glossy, matt), white (glossy)
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 120 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 120 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Ageing resistance (UV) | good |
Humidity resistance | good |
Frost resistance | -40 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Chemical resistance | good |
Temperature resistance long term | 120 °C |
Tamper evidence | yes |
Peel off force from liner | 0,5-10 |
Shelf life time | 12 months |
Temperature resistance short term | 180 °C |
Ageing resistance (UV) | good |
Humidity resistance | good |
Frost resistance | -40 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Chemical resistance | good |
Temperature resistance long term | 120 °C |
Tamper evidence | yes |
Peel off force from liner | 0,5-10 |
Shelf life time | 12 months |
Temperature resistance short term | 180 °C |
Adhesion to Steel | 1.8 N/cm |
Adhesion to Steel | 1.8 N/cm |
Download the files below for more technical details and information on this product.