Product Construction
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
High-Speed markable and fraud-resistant laser engraveable label
tesa® 6947 is a double layer, brittle acrylic film with watermark. Customised and fraud-resistant information, such as company logo, is permanently embedded in the backing. Marking and cutting are achieved by laser in one step, which makes it possible to realise any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and ageing. The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.
Available in: black
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Temperature resistance long term duration | 120 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Frost resistance | -40 °C |
Chemical resistance | very good |
Peel off force from liner | 0,5-10 |
Temperature resistance short term duration | 250 °C |
Humidity resistance | very good |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Temperature resistance long term duration | 120 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Frost resistance | -40 °C |
Chemical resistance | very good |
Peel off force from liner | 0,5-10 |
Temperature resistance short term duration | 250 °C |
Humidity resistance | very good |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Download the files below for more technical details and information on this product.