Product Construction
| Backing material | Acrylic-coated cloth |
| Total thickness | 300 µm |
| Type of adhesive | natural rubber |
tesa® 4661
Standard acrylic paste coated cloth tape
Product description
tesa® 4661 is a strong acrylic paste coated cloth tape. It is based on a 148 mesh woven rayon fabric backing and a natural rubber adhesive.
tesa® 4661 is an all-round cloth tape for a wide range of applications, often used for belting of components.
Features:
- high adhesion, even on rough surfaces
- very high tensile strength
- abrasion-resistant
- available in 7 colours: black, white, grey, yellow, blue, red, green
Product details and specifications
Application Fields
- Marking of wires and cables
- Bundling of pipes, profiles etc.
- Noise protection
- Harnessing
- Colour coding
- Securing of sharp edges
- Sealing of cartons, tins and tubes
- Belting of components, nails, screws, bicylce rims etc.
Product Construction
| Backing material | Acrylic-coated cloth |
| Total thickness | 300 µm |
| Type of adhesive | natural rubber |
Properties / Performance Values
| Elongation at break | 12 % |
| Tensile strength | 100 N/cm |
| Hand tearability | very good |
| Temperature resistance (30 min) | 140 °C |
| Abrasion resistance | very good |
| Mesh | 145 threads/inch² |
| Straight tear edges | very good |
| Temperature resistance (removability from aluminum after 30 min exposure) | 140 °C |
| Easy to write on | yes |
| Available as Spools | yes |
| Water resistance | good |
| Easy to remove | yes |
Properties / Performance Values
| Elongation at break | 12 % |
| Tensile strength | 100 N/cm |
| Hand tearability | very good |
| Temperature resistance (30 min) | 140 °C |
| Abrasion resistance | very good |
| Mesh | 145 threads/inch² |
| Straight tear edges | very good |
| Temperature resistance (removability from aluminum after 30 min exposure) | 140 °C |
| Easy to write on | yes |
| Available as Spools | yes |
| Water resistance | good |
| Easy to remove | yes |
Adhesion to Values
| Adhesion to steel | 5.8 N/cm |
Adhesion to Values
| Adhesion to steel | 5.8 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
