Product Construction
Backing material | PE film |
Total thickness | 120 µm |
Type of adhesive | type: natural rubber |
Repairing tape for silage cover films
The single-sided tape tesa® 4648 is designed with a black, UV-stabilized polyethylene film and coated with a pressure sensitive adhesive based on natural rubber. The rubber adhesive ensures a quick bonding to a variety of substrates and also the tape itself.
It is UV and water resistant for up to twelve months and can be torn by hand so that no further tools are needed. Our tape is based on halogen-free PE film in order to facilitate the recycling process of silage films after end of life, having been tested successfully in industrial recycling processes. tesa® 4648 is an ideal solution to repair damaged silage films.
Backing material | PE film |
Total thickness | 120 µm |
Type of adhesive | type: natural rubber |
Backing material | PE film |
Total thickness | 120 µm |
Type of adhesive | type: natural rubber |
UV-resistance | 52 week/s |
Elongation at break | 400 % |
Tensile strength | 20 N/cm |
Tack | good |
Operation temperature up to | 60 °C |
Hand tearability | yes |
Lowest application temperature | 0 °C |
Water resistance | yes |
Humidity resistance | yes |
Ageing resistance (UV) | good |
UV-resistance | 52 week/s |
Elongation at break | 400 % |
Tensile strength | 20 N/cm |
Tack | good |
Operation temperature up to | 60 °C |
Hand tearability | yes |
Lowest application temperature | 0 °C |
Water resistance | yes |
Humidity resistance | yes |
Ageing resistance (UV) | good |
Adhesion to Backing | 1.5 N/cm |
Adhesion to PE (initial) | 1.5 N/cm |
Adhesion to steel | 2.2 N/cm |
Adhesion to Backing | 1.5 N/cm |
Adhesion to PE (initial) | 1.5 N/cm |
Adhesion to steel | 2.2 N/cm |
Download the files below for more technical details and information on this product.