Product Construction
Adhesive weight | 25 g/m² |
Backing material | Acrylic film |
Thickness of tape | 110 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 122 g/m² |
High-speed laser markable film
tesa® 6940 PV3 Silver glossy/ black is a two-layer high-speed laser markable film with an acrylic adhesive. The brittle product construction ensures that the label is destroyed upon any attempt of removing and tampering and leaves a visible trace (damage of information and label).
Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The top layer allows for high marking speed (up to 4000mm/sec.).
Adhesive weight | 25 g/m² |
Backing material | Acrylic film |
Thickness of tape | 110 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 122 g/m² |
Adhesive weight | 25 g/m² |
Backing material | Acrylic film |
Thickness of tape | 110 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 122 g/m² |
Shelf life time | 12 months |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Temperature resistance short term duration | 250 °C |
Temperature resistance long term duration | 120 °C |
Frost resistance | -40 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Peel off force from liner | 0,5-10 |
Chemical resistance | very good |
Humidity resistance | good |
Shelf life time | 12 months |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Temperature resistance short term duration | 250 °C |
Temperature resistance long term duration | 120 °C |
Frost resistance | -40 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Peel off force from liner | 0,5-10 |
Chemical resistance | very good |
Humidity resistance | good |
Adhesion to steel | 1.8 N/cm |
Adhesion to steel | 1.8 N/cm |
Download the files below for more technical details and information on this product.