Using the tesa® Adjustable Adhesive Nail for Wallpaper & Plaster 1kg

Cleaning your surface with a dust-free cloth will ensure optimal holding power. Always test the load-bearing capacity of your surface before mounting.

Taking care not to touch the adhesive surfaces, detach 2 strips from their backing using the tabs provided. Place them vertically on the wallpaper with the blue tabs at the bottom, facing the wall.

Press down firmly on each strip all over for at least 5 seconds to activate the Powerstrips® Technology.

Remove the protective foil where you see the Powerstrips® emblem and align each nail with the top edge of each one, ensuring that the nail heads are at the top – then fold them down onto the adhesive immediately above the grey line.

Use your thumbs to press down firmly for 5 seconds at the top, middle and bottom of each nail.

To make sure your picture’s going to be hanging perfectly straight, slide the red toggles up and then adjust the precise height of each nail head. Slide the toggles back down again to lock them in position. Whether you’re mounting pictures, shelves or ornaments, you’ll be amazed how useful it is to be able to adjust the height of these things.

Each Adjustable Adhesive Nail can hold 1kg – or 2kg if you use two of them – and is perfectly suited to non flat-backed objects. And because they’re removable and reusable, moving them around takes just a moment or two when you want a change of scene.

Take hold of the nail head with one hand and the exposed tab at the bottom of the Adhesive Strip with the other. Now, without pressing the nail onto the surface, simply pull straight downwards towards the floor (NOT away from the surface or diagonally). This gently releases the thousands of tiny bonds that form the adhesive surface.