Product Construction
| 컬러 | 검정 |
tesa® 60120
액체 점착 촉진 제품
Product description
tesa® 60120 제품은 다양한 기판, 특히 포토폴리머 인쇄판의 PET 안착 필름등에 tesa® Twinlock 또는 tesa® Softprint 제품의 접착성을 향상시키는 데 사용할 수 있습니다.
제품 세부 사항 및 사양
Application Fields
Our tesa® 60120 is recommended for using on the backside of printing plates. This product can be used to significantly improve the bonding strength of tesa® Twinlock or tesa® Softprint. Testing shows significantly higher peel adhesion values.
Product Construction
| 컬러 | 검정 |
Properties / Performance Values
| 일관성 | 액체 |
| 밀도 | 0.82 g/cm³ |
Properties / Performance Values
| 일관성 | 액체 |
| 밀도 | 0.82 g/cm³ |
Additional Info
Before using our adhesion promoter, the bonding surface should be free of dust, grease, oil, moisture, and other contaminants. Therefore, we highly recommend cleaning the substrate with a lint-free cloth using 100 % of IPA.
Once the surface has been cleaned, you can go ahead and apply our tesa® 60120 with the Pen. The relevant surface should be coated thinly with adhesion promoter in order to reach the highest bonding performance. It is important to wait at least one minute in order to give solvents time to evaporate. Please make sure to keep the prepared surface free of contaminants prior to the application.
For further information and advice on safe handling please refer to our safety data sheet (SDS), which is available upon request.
Once the surface has been cleaned, you can go ahead and apply our tesa® 60120 with the Pen. The relevant surface should be coated thinly with adhesion promoter in order to reach the highest bonding performance. It is important to wait at least one minute in order to give solvents time to evaporate. Please make sure to keep the prepared surface free of contaminants prior to the application.
For further information and advice on safe handling please refer to our safety data sheet (SDS), which is available upon request.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.
