Product Construction
| 기재 소재 | copper film |
| 이형지 두께 | 50 µm |
| 이형지 색깔 | 투명성 |
| 이형지 종류 | PET필름 |
| 점착제 종류 | 전도성 아크릴 |
| 총두께 | 50 µm |
| 컬러 | orange |
tesa® 60318
tesa® 60318 50 μm single sided best conductivity & Low Activation Pressure electrically conductive copper tape
제품 기능
- High and stable electrical conductivity
- Excellent EMI shielding performance
- Excellent electrical conductivity in XYZ-direction even under low lamination pressure process
Product description
tesa® 60318 is best conductivity & Low Activation Pressure electrically conductive copper tape. It consists of electrically conductive copper backing and specially designed single sided conductive adhesive coating layer. Designed for EMI shielding for display, antenna and other components applications.
제품 세부 사항 및 사양
제품 기능
- High and stable electrical conductivity
- Excellent EMI shielding performance
- Excellent electrical conductivity in XYZ-direction even under low lamination pressure process
- Good bonding strength
- High heat spreading performance with copper backing
Application Fields
- FPC shielding
- Component shielding with pressure sensitive application
- Shielding application with high conductivity
- OLED display related application
Product Construction
| 기재 소재 | copper film |
| 이형지 두께 | 50 µm |
| 이형지 색깔 | 투명성 |
| 이형지 종류 | PET필름 |
| 점착제 종류 | 전도성 아크릴 |
| 총두께 | 50 µm |
| 컬러 | orange |
Properties / Performance Values
| 연결부 저항 x-y-Z-축 방향 (50g) | 34 mOhm |
| z-축 방향 접촉저항 (2kg) | 19 mOhm |
| 이형지 제거 | 간단함 |
| z-축 방향 접촉저항 (50g) | 21 mOhm |
| 연결부 저항 x-y-Z- 축 방향 (2kg) | 31 mOhm |
Properties / Performance Values
| 연결부 저항 x-y-Z-축 방향 (50g) | 34 mOhm |
| z-축 방향 접촉저항 (2kg) | 19 mOhm |
| 이형지 제거 | 간단함 |
| z-축 방향 접촉저항 (50g) | 21 mOhm |
| 연결부 저항 x-y-Z- 축 방향 (2kg) | 31 mOhm |
Adhesion to Values
| Steel점착력 (50g; 초기) | 4.2 N/cm |
| Steel점착력 (2kg, 14일 경과) | 6.2 N/cm |
| Steel점착력 (50g, 14일 경과) | 5.5 N/cm |
| Steel점착력 (2kg, 초기) | 5.6 N/cm |
Adhesion to Values
| Steel점착력 (50g; 초기) | 4.2 N/cm |
| Steel점착력 (2kg, 14일 경과) | 6.2 N/cm |
| Steel점착력 (50g, 14일 경과) | 5.5 N/cm |
| Steel점착력 (2kg, 초기) | 5.6 N/cm |
Additional Info
- tesa method: tested by 4mm x 4mm tesa jig
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
