Product Construction
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 95 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Laser markable and self-adhesive
tesa® 6930 is a double layer, brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realise any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and ageing. The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
Available in: black (glossy, matte), silver (glossy, matte), white (glossy)
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 95 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Adhesive weight | 25 g/m² |
Backing material | Acrylic |
Thickness of tape | 95 µm |
Type of adhesive | acrylic |
Type of liner | coated paper |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Chemical resistance | very good |
Frost resistance | -40 °C |
Temperature resistance short term duration | 250 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Humidity resistance | very good |
Shelf life time | 12 months |
Temperature resistance long term duration | 120 °C |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Chemical resistance | very good |
Frost resistance | -40 °C |
Temperature resistance short term duration | 250 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Humidity resistance | very good |
Shelf life time | 12 months |
Temperature resistance long term duration | 120 °C |
Adhesion to steel | 1.8 N/cm |
Adhesion to steel | 1.8 N/cm |
Download the files below for more technical details and information on this product.