Product Construction
| Adhesive Type | silicone |
| Backing material | PET |
| Total thickness | 2.76 mils
70 µm |
tesa® 50620
Product Features
- Residue-free removability for masking and surface protection applications
- The high-temperature tape features easy application and easy one-piece removal without leaving residues behind
- The tape enables sharp color edges and offers good paint anchorage.
Product description
tesa® 50620 Basic powder coating tape is a green-translucent, high-temperature masking tape featuring a polyester backing with a silicone adhesive. tesa® 50620 is used for various applications, especially for masking during powder-coating processes and surface protection applications.
Product details and specifications
Product Features
- Residue-free removability for masking and surface protection applications
- The high-temperature tape features easy application and easy one-piece removal without leaving residues behind
- The tape enables sharp color edges and offers good paint anchorage.
- The masking tape's silicone adhesive system makes the tape heat-resistant, withstanding temperatures of up to 200°C for as long as 30 minutes at a time.
Application Fields
- tesa® 50620 is suited for masking off areas that are to be protected during general powder-coating applications.
- The high-temperature tape can withstand temperatures of up to 200°C for 30 minutes.
- tesa® 50620 is used for surface protection applications or bonding of non-polar materials.
- The masking tape features residue-free removal.
Product Construction
| Adhesive Type | silicone |
| Backing material | PET |
| Total thickness | 2.76 mils
70 µm |
Properties / Performance Values
| Elongation at break | 110 % |
| Tensile strength | 42.83 lbs/in
75 N/cm |
| Dielectric breakdown voltage | 4000 V |
| Paint anchorage | good |
| Easy to remove | yes |
| Sharp color edge | yes |
| Hand tearability | no |
| Temperature resistance (30 min) | 392 °F
200 °C |
Properties / Performance Values
| Elongation at break | 110 % |
| Tensile strength | 42.83 lbs/in
75 N/cm |
| Dielectric breakdown voltage | 4000 V |
| Paint anchorage | good |
| Easy to remove | yes |
| Sharp color edge | yes |
| Hand tearability | no |
| Temperature resistance (30 min) | 392 °F
200 °C |
Adhesion to Values
| Adhesion to Steel | 2.06 lbs/in
3.6 N/cm |
Adhesion to Values
| Adhesion to Steel | 2.06 lbs/in
3.6 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
