tesa® DRAAD Bathroom Grab Bar, Self-Adhesive, Brushed Stainless-Steel

The rounded tesa® Draad grab bar is not only practical but also attractive with its brushed stainless-steel body. It is mounted with an adhesive solution rather than drilling, but you can still fully rely on its hold. Without drilling, walls and tiles don’t suffer damage. The adhesive takes 24 hours to set. You can remove the bathroom grab bar without a trace whenever you like and also effortlessly reuse it elsewhere with a new adapter BK164-2. Cleaning instruction: The mounting surface must be dust-,grease-, lime-free, and dry. After thorough cleaning, clean the surface with rubbing alcohol. Cleaning agents containing silicone are not suitable for cleaning.

Product information: The product must not be exposed to water on a regular basis (no direct water jet or water running down a wall). Suitable for dry areas with occasional splashing water only. The grab bar can be loaded with a maximum of 130kg. It is not suitable for use as a climbing assistance for getting up.

tesa.Power.Kit Glue: Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.

• Bath grab bar with tesa® Power.Kit fastening technology
• Stainless steel, chromed, guaranteed rustproof, round wall plates
• Secure hold and very high strength – withstands a load of up to 130 kg (tested to ISO17966:2016)
• Removable, no damage to the surface, reusable with the fastening adapter BK 164-2
• Easy and clean fitting without drilling
• Suitable for even, glazed tiles with only occasional splash water – splash-proof according to IPX4
• Not suitable for fitting under water and surfaces other than glazed tiles
• Dimensions: 60 mm x 317 mm x 75 mm
• The product life span is 5 years when used properly