Product Construction
Adhesive Type | acrylic |
Adhesive weight | 35.56 lbs/in²
25 g/m² |
Backing material | Acrylic |
Liner Type | coated paper |
Thickness of tape | 3.74 mils
95 µm |
Laser markable and self-adhesive
tesa® 6930 is a double layer, brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
Available in: black (glossy, matte), silver (glossy, matte), white (glossy)
Adhesive Type | acrylic |
Adhesive weight | 35.56 lbs/in²
25 g/m² |
Backing material | Acrylic |
Liner Type | coated paper |
Thickness of tape | 3.74 mils
95 µm |
Adhesive Type | acrylic |
Adhesive weight | 35.56 lbs/in²
25 g/m² |
Backing material | Acrylic |
Liner Type | coated paper |
Thickness of tape | 3.74 mils
95 µm |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Chemical Resistance | very good |
Frost resistance | -40 °F
-40 °C |
Temperature resistance short term | 482 °F
250 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Humidity resistance | very good |
Shelf life time | 12 months |
Temperature resistance long term | 248 °F
120 °C |
Ageing resistance (UV) | very good |
Tamper evidence | yes |
Chemical Resistance | very good |
Frost resistance | -40 °F
-40 °C |
Temperature resistance short term | 482 °F
250 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Humidity resistance | very good |
Shelf life time | 12 months |
Temperature resistance long term | 248 °F
120 °C |
Adhesion to Steel | 1.03 lbs/in
1.8 N/cm |
Adhesion to Steel | 1.03 lbs/in
1.8 N/cm |
Download the files below for more technical details and information on this product.