Product Construction
Adhesive Type | acrylic |
Backing material | Acrylic |
Liner Type | coated paper |
Weight of liner | 170.68 lbs/in²
120 g/m² |
High heat resistant, high-speed markable and fraud-resistant
tesa® 6957 is a double layer, brittle acrylic film with watermark. Customized and fraud-resistant information, such as company logo, is permanently embedded in the backing. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and aging.
The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces. The adhesive will leave an UV-detectable trace (“UV-Footprint”) on most surfaces as required by GB 25978 (P.R.C.) and NHTSA §541.5 (USA).
The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.
Adhesive Type | acrylic |
Backing material | Acrylic |
Liner Type | coated paper |
Weight of liner | 170.68 lbs/in²
120 g/m² |
Adhesive Type | acrylic |
Backing material | Acrylic |
Liner Type | coated paper |
Weight of liner | 170.68 lbs/in²
120 g/m² |
Temperature resistance long term | 302 °F
150 °C |
Frost resistance | -40 °F
-40 °C |
Humidity resistance | very good |
Chemical Resistance | very good |
Ageing resistance (UV) | very good |
Suitable laser | , Nd:YAG, Yb:YAG |
Temperature resistance short term | 482 °F
250 °C |
Peel off force from liner | 0,5-10 |
Tamper evidence | yes |
Temperature resistance long term | 302 °F
150 °C |
Frost resistance | -40 °F
-40 °C |
Humidity resistance | very good |
Chemical Resistance | very good |
Ageing resistance (UV) | very good |
Suitable laser | , Nd:YAG, Yb:YAG |
Temperature resistance short term | 482 °F
250 °C |
Peel off force from liner | 0,5-10 |
Tamper evidence | yes |
Download the files below for more technical details and information on this product.