Product Construction
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Laser markable and self-adhesive
tesa® 6930 is a double layer, brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and ageing. The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces.
This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
Available in: black (glossy, matte), silver (glossy, matte), white (glossy)
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Backing material | Acrylic |
Type of adhesive | acrylic |
Type of liner | coated paper |
Weight of liner | 120 g/m² |
Humidity resistance | very good |
Temperature resistance short term | 250 °C |
Temperature resistance long term | 120 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Chemical resistance | very good |
Frost resistance | -40 °C |
Peel off force from liner | 0,5-10 |
Tamper evidence | yes |
Ageing resistance (UV) | very good |
Humidity resistance | very good |
Temperature resistance short term | 250 °C |
Temperature resistance long term | 120 °C |
Suitable laser | , Nd:YAG, Yb:YAG |
Chemical resistance | very good |
Frost resistance | -40 °C |
Peel off force from liner | 0,5-10 |
Tamper evidence | yes |
Ageing resistance (UV) | very good |
Download the files below for more technical details and information on this product.