Product Construction
| Backing material | slightly-creped paper |
| Total thickness | 170 µm |
| Type of adhesive | natural rubber |
tesa® 4378 Easy Cover® Auto
'3 in 1' Car body masking solution for large areas
Product description
tesa® 4378 Easy Cover® Auto is a convenient “3 in 1” solution for the masking of large areas for car body repair. The convenient system includes:
1. Masking tape tesa® 4309
2. Masking paper border
3. HDPE masking film
The main advantage is the combination of the advantages of the single components.
a) tesa® 4309 is a finely creped, extremely stretchable and flexible paper masking tape. It is suitable for water and solvent based paints and can be used for paint spraying with subsequent oven/ or IR-drying up to a temperature of 120 °C.
b) The additional paper edge provides perfect paint absorption on the most critical area close to the repair.
c) The HDPE film serves for the protection against spray particles. It is specifically treated for better paint adherence. Due to the high static the film clings to the car body.
Easy Cover® Auto allows a single person to cover large areas easily and quickly. For storing, transporting and disposing off tesa® Easy Cover® Auto is very space saving.
Product details and specifications
Application Fields
Masking of large areas before paint jobs in car body repair shops.
Product Construction
| Backing material | slightly-creped paper |
| Total thickness | 170 µm |
| Type of adhesive | natural rubber |
Properties / Performance Values
| Elongation at break | 12 % |
| Tensile strength | 47 N/cm |
| Easy to remove | yes |
| Thickness of masking coverage | 10 µm |
| Weight of addtl. protection paper | 37 g/m² |
| Material of masking coverage | HDPE |
Properties / Performance Values
| Elongation at break | 12 % |
| Tensile strength | 47 N/cm |
| Easy to remove | yes |
| Thickness of masking coverage | 10 µm |
| Weight of addtl. protection paper | 37 g/m² |
| Material of masking coverage | HDPE |
Adhesion to Values
| Adhesion to steel | 3.5 N/cm |
Adhesion to Values
| Adhesion to steel | 3.5 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
