Product Construction
| Backing material | cloth |
| Color | white |
| Colour of liner | brown |
| Total thickness | 235 µm |
| Type of adhesive | synthetic rubber |
| Type of liner | glassine |
tesa® 4939
Removable d/s PET-cloth, differential rubber based adhesive system
Product description
tesa® 4939 is a double-sided floor laying tape. It consists of a strong PET-cloth backing in combination with a differential rubber adhesive system.
The special formulated adhesive on the open side combines a high initial bonding power with a residue free removability up to 14 days from the most common surfaces. (Needs to be tested individually before usage!)
Product details and specifications
Application Fields
Temporary floor laying during fairs, exhibitions, conventions & renovations
Product Construction
| Backing material | cloth |
| Color | white |
| Colour of liner | brown |
| Total thickness | 235 µm |
| Type of adhesive | synthetic rubber |
| Type of liner | glassine |
Properties / Performance Values
| Elongation at break | 25 % |
| Tensile strength | 38 N/cm |
| Static shear resistance at 70°C | medium |
| Humidity resistance | good |
| Static shear resistance at 40°C | good |
| Fogging | very good |
| Chemical resistance | good |
| Tack | very good |
| Temperature resistance short term | 80 °C |
| Ageing resistance (UV) | medium |
| Temperature resistance long term | 40 °C |
Properties / Performance Values
| Elongation at break | 25 % |
| Tensile strength | 38 N/cm |
| Static shear resistance at 70°C | medium |
| Humidity resistance | good |
| Static shear resistance at 40°C | good |
| Fogging | very good |
| Chemical resistance | good |
| Tack | very good |
| Temperature resistance short term | 80 °C |
| Ageing resistance (UV) | medium |
| Temperature resistance long term | 40 °C |
Adhesion to Values
| Adhesion to PE (initial) | 2.5 N/cm |
| Adhesion to PE (after 14 days) | 2 N/cm |
| Adhesion to PE (covered side, initial) | 4.5 N/cm |
| Adhesion to PE (covered side, after 14 days) | 5 N/cm |
| Adhesion to PP (initial) | 4.5 N/cm |
| Adhesion to PP (after 14 days) | 2.5 N/cm |
| Adhesion to PP (covered side, after 14 days) | 5 N/cm |
| Adhesion to PP (covered side, initial) | 6.5 N/cm |
| Adhesion to Steel (initial) | 7.5 N/cm |
| Adhesion to Steel (after 14 days) | 5.5 N/cm |
| Adhesion to Steel (covered side, after 14 days) | 8 N/cm |
| Adhesion to Steel (covered side, initial) | 9 N/cm |
Adhesion to Values
| Adhesion to PE (initial) | 2.5 N/cm |
| Adhesion to PE (after 14 days) | 2 N/cm |
| Adhesion to PE (covered side, initial) | 4.5 N/cm |
| Adhesion to PE (covered side, after 14 days) | 5 N/cm |
| Adhesion to PP (initial) | 4.5 N/cm |
| Adhesion to PP (after 14 days) | 2.5 N/cm |
| Adhesion to PP (covered side, after 14 days) | 5 N/cm |
| Adhesion to PP (covered side, initial) | 6.5 N/cm |
| Adhesion to Steel (initial) | 7.5 N/cm |
| Adhesion to Steel (after 14 days) | 5.5 N/cm |
| Adhesion to Steel (covered side, after 14 days) | 8 N/cm |
| Adhesion to Steel (covered side, initial) | 9 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
